According to a report released by the International Stainless Steel Forum (ISSF). Preliminary statistics show that world stainless steel crude steel production increased by 7.8% month-on-month to 14.76 million tons in the second quarter of this year, while it fell by 1.7% to 28.4 million tons in the first half of the year. ISSF data shows that China's stainless steel crude steel production increased by 8.2% in the first half of this year, while stainless steel crude steel production in Asia except China and South Korea fell by 14.6%, the United States fell by 13.5%, and fell by 13.4%.

Chemical composition of soft steels in mass percent
Material	C (%)	Si (%)	Mn (%)	P (%)	S (%)	Al (%)	Ti (%)
VW50065 CR5	≤ 0.02	≤ 0.50	≤ 0.30	≤ 0.020	≤ 0.020	≥ 0.010	≤ 0.30
Mechanical properties of soft steels (testing in transverse direction)
Material	Proof stress  R(p0.2)	Tensile strength R(m)	Elongation at break			r		n (10-20/Ag)
	MPa	MPa	A	A (50 mm)	A (80 mm)	r(90/20)	r(m/20)
			%	%	%
VW50065 CR5	110-170	260-330	－	≥ 42	≥ 41	≥ 2.1	≥ 1.8	≥ 0.22

Chemical composition of soft steels in mass percent
Material	C (%)	Si (%)	Mn (%)	P (%)	S (%)	Al (%)	Ti (%)
VW50065 CR4	≤ 0.06	≤ 0.50	≤ 0.40	≤ 0.025	≤ 0.025	≥ 0.010	≤ 0.30
Mechanical properties of soft steels (testing in transverse direction)
Material	Proof stress  R(p0.2)	Tensile strength R(m)	Elongation at break			r		n (10-20/Ag)
	MPa	MPa	A	A (50 mm)	A (80 mm)	r(90/20)	r(m/20)
			%	%	%
VW50065 CR4	140-180	270-330	－	≥ 40	≥ 39	≥ 1.9	≥ 1.6	≥ 0.20

Chemical composition of soft steels in mass percent
Material	C (%)	Si (%)	Mn (%)	P (%)	S (%)	Al (%)	Ti (%)
VW50065 CR3	≤ 0.08	≤ 0.50	≤ 0.50	≤ 0.030	≤ 0.030	≥ 0.010	≤ 0.30
Mechanical properties of soft steels (testing in transverse direction)
Material	Proof stress  R(p0.2)	Tensile strength R(m)	Elongation at break			r		n (10-20/Ag)
	MPa	MPa	A	A (50 mm)	A (80 mm)	r(90/20)	r(m/20)
			%	%	%
VW50065 CR3	140-210	270-350	－	≥ 38	≥ 38	≥ 1.8	≥ 1.5	≥ 0.18

Chemical composition of soft steels in mass percent
Material	C (%)	Si (%)	Mn (%)	P (%)	S (%)	Al (%)	Ti (%)
VW50065 CR2	≤ 0.10	≤ 0.50	≤ 0.50	≤ 0.065	≤ 0.045	≥ 0.010	－
Mechanical properties of soft steels (testing in transverse direction)
Material	Proof	Tensile	Elongation at break			r		n10 – 20/Ag
	stress Rp0.2	strength Rm	A	A50 mm	A80 mm	r90/20	rm/20
	MPa	MPa	%	%	%
VW50065 CR2	140-240	270-370	－	≥ 34	≥ 34	≥ 1.3	≥ 1.2	≥ 0.16

Chemical composition of soft steels in mass percent
Material	C (%)	Si (%)	Mn (%)	P (%)	S (%)	Al (%)	Ti (%)
VW50065 CR1	≤ 0.12	≤ 0.50	≤ 0.60	≤ 0.065	≤ 0.045	≥ 0.010	－

Mechanical properties of soft steels (testing in transverse direction)
Material	Proof	Tensile	Elongation at break			r		n10 – 20/Ag
	stress Rp0.2	strength Rm	A	A50 mm	A80 mm	r90/20	rm/20
	MPa	MPa	%	%	%
VW50065 CR1	140-300	270-410	－	≥ 30	≥ 28	－	－	－

On the 25th local time, Mike Johnson, a Republican congressman from Louisiana, received 220 votes in the election of Speaker of the House of Representatives and was elected as the new Speaker of the House of Representatives. Democratic candidate Hakeem Jeffries received 209 votes. Johnson is currently the vice chairman of the House of Representatives Republican Conference and was selected as the Republican candidate for speaker on the evening of the 24th.

Bending means that the metal sheet first undergoes elastic deformation and then enters plastic deformation under the pressure of the upper or lower mold of the bending machine. In the initial stage of plastic bending, the sheet metal is free to bend. As the upper or lower mold exerts pressure on the sheet material, the sheet material gradually gets closer to the inner surface of the V-shaped groove of the lower mold. At the same time, the radius of curvature and the bending arm also change. Gradually become smaller and continue to pressurize until the end of the stroke, so that the upper and lower molds are in full contact with the plate at three points. At this time, a V-shaped bend is completed, which is commonly known as bending.

The highest-level international event under the “One Belt, One Road” framework in 2023 The third "Belt and Road" International Cooperation Summit Forum is the highest-level international event under the "Belt and Road" framework. The theme is "High-quality joint construction of the 'Belt and Road' and joint efforts to achieve common development and prosperity." This forum is not only the most grand event to commemorate the 10th anniversary of the "Belt and Road" initiative, but also an important platform for all parties to discuss high-quality cooperation in building the "Belt and Road". The forum was held in Beijing from October 17th to 18th.