301 stainless steel is an austenitic stainless steel that is popularly used in a variety of industrial applications due to its excellent corrosion resistance, high strength, and good formability. It is a non-magnetic alloy, making it suitable for applications where magnetic properties are undesirable.

Chemical composition

Element	C	Si	Mn	P	S	Cr	Ni	N
min	-	-	-	-	-	16	6	-
max	0.15	1	2	0.045	0.03	18	8	0.1

Note: These values are typical

Mechanical properties

Tensile strength		Yield strength		Elongation
215-515 Mpa		205-345 Mpa		40-60%

Note: These values are approximate

Physical properties

Property	Value
Density	7.93 g/cm^3
Thermal conductivity	16.3 W/(m·K)
Specific heat capacity	500 J/(kg·K)
Electrical resistivity	0.73 μΩ·m
Thermal expansion	17.9 μm/(m·K)
Melting point	1398-1420 °C
Magnetic properties	Ferromagnetic

Note: These values are approximate

 It is commonly used in applications where high strength and good corrosion resistance are required, such as in the production of automotive parts, springs, and kitchen utensils.
While 301 stainless steel is not as corrosion resistant as some other austenitic stainless steels, such as 304 or 316, it is often used in applications where cost is a factor or where the specific properties of 301 stainless steel are more suitable for the application.

Our company: Hengqiao(Shanghai) International Trading Limited

As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！

204 stainless steel is a type of austenitic stainless steel that is commonly used in a variety of industrial and commercial applications due to its excellent corrosion resistance, good mechanical properties, and affordability.

Chemical composition

Element	C	Si	Mn	P	S	Cr	Ni	N
min	-	-	6.5	-	-	15	1.5	0.15
max	0.15	1	9.5	0.06	0.03	17	3.5	0.3

Note: These values are typical

Mechanical properties

Tensile strength		Yield strength		Elongation
620 Mpa		310 Mpa		40%

Note: These values are approximate

Physical properties

Property	Value
Density	7.75 g/cm³
Thermal Conductivity	15 W/(m·K)
Specific Heat Capacity	500 J/(kg·K)
Melting Point	1398-1454 °C
Electrical Resistivity	0.75 × 10⁻⁶ Ω·m

Note: These values are approximate

This type of stainless steel is often used in applications such as food processing equipment, automotive trim, and architectural applications. Its unique combination of properties makes it a versatile and reliable material for a wide range of applications.

Our company: Hengqiao(Shanghai) International Trading Limited

As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！

202 stainless steel is a low-cost austenitic stainless steel with a low nickel content in its chemical composition, usually 4-6%. Compared with other stainless steels, 202 stainless steel is less corrosion resistant, but still has good corrosion resistance and wear resistance, while having good mechanical properties.

Chemical composition

Element	C	Si	Mn	P	S	Cr	Ni	N
min	-	-	7.5	-	-	17	4	-
max	0.15	1	10	0.06	0.03	19	6	0.25

Note: These values are typical

Mechanical properties

Tensile strength		Yield strength		Elongation
515 Mpa		275 Mpa		40%

Note: These values are approximate

Physical properties

Property	Value
Density	7.8 g/cm^3
Melting point	1398-1446°C
Thermal expansion coefficient	16.5 µm/m°C
Specific heat capacity	500 J/kg°C
Thermal conductivity	15 W/m°C
Electrical resistivity	0.73 µΩm
Magnetic susceptibility	Ferromagnetic

Note: These values are approximate

202 stainless steel is often used in the manufacture of various products such as home appliances, auto parts, plumbing fittings, and kitchen utensils.

As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！

201L stainless steel is an austenitic stainless steel with low carbon content, making it more resistant to sensitization and intergranular corrosion. It is a cost-effective alternative to higher nickel-containing stainless steels such as 304 and 316, while still offering good mechanical and physical properties.

Chemical composition

Element	C	Si	Mn	P	S	Cr	Ni	N
min	-	-	5.5	-	-	16	3.5	-
max	0.03	0.75	7.5	0.06	0.03	18	5.5	0.25

Note: These values are typical

Mechanical properties

Tensile strength		Yield strength		Elongation
515 Mpa		275 Mpa		60%

Note: These values are approximate

Physical properties

Property	Value
Density	7.8 g/cm3 (0.281 lb/in3)
Melting point	1399-1421°C (2550-2590°F)
Specific heat capacity	0.5 J/g°C (0.12 BTU/lb°F)
Thermal conductivity	16.2 W/m°C (9.4 BTU/hft°F)
Coefficient of thermal expansion	16.3 µm/m°C (9.0 µin/in°F)
Electrical resistivity	0.73 µΩm (0.28 µΩin)

Note: These values are approximate

Its low carbon content makes it more suitable for welding and other high temperature applications where the material needs to be highly malleable. 201L stainless steel is frequently used in a variety of applications such as automotive trim, kitchen equipment, and architectural applications.

Our company: Hengqiao(Shanghai) International Trading Limited

As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！

201 stainless steel is a type of austenitic stainless steel that is commonly used in a wide range of applications. It is a low-cost alternative to other types of stainless steel, such as 304 and 316, and is known for its excellent corrosion resistance, high strength, and good formability.

Chemical composition

Element	C	Si	Mn	P	S	Cr	Ni	N
min	-	-	5.5	-	-	16	3.5	-
max	0.15	1	7.5	0.06	0.03	18	5.5	0.25

Note: These values are typical

Mechanical properties

Tensile strength(MPa)		Yield strength(MPa)		Elongation%		Hardness(HRB)
≥535		≥245		≥30		≤100

Note: These values are approximate

Physical properties

Property	Value
Density	7.81 g/cm³
Melting point	1399-1420 °C (2550-2588 °F)
Thermal conductivity	16.2 W/m-K at 100°C
Electrical resistivity	0.73 μΩm
Young's modulus	200 GPa
Poisson's ratio	0.29
Coefficient of thermal expansion	16.3 µm/m-K at 0-100°C
Magnetic properties	Non-magnetic (annealed)

Note: These values are approximate

Compared to other austenitic stainless steels, 201 stainless steel has a lower nickel content, which makes it more affordable, but is also slightly less resistant to certain types of corrosion, such as chloride-induced stress corrosion cracking.
Widely used in the manufacture of kitchenware, tableware, automotive parts, industrial equipment and many other products that require strength, corrosion resistance and cost-effectiveness.

Our company: Hengqiao(Shanghai) International Trading Limited

As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！

MS.50002-IFC210Y340T

MS.50002-IFC240Y360T

MS.50002-IFC280Y380T

MS.50002-BHC180Y290T

MS.50002-BHC210Y310T

MS.50002-BHC240Y340T

MS.50002-BHC280Y380T

MS.50002-LAC830Y860T

MS.50002-MCHMCH550Y600T

MS.50002-MCH600Y650T

MS.50002-MCH650Y700T

MS.50002-MCH700Y750T

MS.50002-DPC290Y490T

MS.50002-DPC340Y590T

MS.50002-DPC420Y780T

MS.50002-DPC420Y780T HF

MS.50002-DPC550Y980T

MS.50002-DPC700Y980T

MS.50002-DPC950Y1180T

MS.50002-DPH330Y580T

MS.50002-TRC400Y690T

MS.50002-TRC440Y780T

MS.50002-TBC700Y1050T

MS.50002-FBH440Y580T

MS.50002-MPH620Y780T

MS.50002-MPH780Y980T

MS.50002-MPC570Y780T

MS.50002-MPC780Y980T

MS.50002-MPC900Y1180T

MS.50002-MTC1030Y1300T

MS.50002-MTC1200Y1500T

MS.50002-TWC450Y950T

MS.50002-QPC650Y980T

MS.50002-STH235Y360T

MS.50002-STH270Y430T

MS.50002-STH350Y510T

Our company: Hengqiao(Shanghai) International Trading Limited

The company's main business is general GMW standard, Fiat EFE standard, Volvo VDA standard, Nissan NEN standard, Volkswagen VW50065, Ford WSS-M and other standard series of automotive steel.
Looking forward to your inquiry！

STJLR.50.5174 HSLA260

STJLR.50.5174 HSLA300

STJLR.50.5174 HSLA340

STJLR.50.5174 HSLA380

STJLR.50.5174 HSLA420

STJLR-50-5173 BH180

STJLR-50-5173 BH220

STJLR-50-5173 BH260

STJLR-50-5173 BH300

STJLR.50.5172 MS0

STJLR.50.5172 MS1

STJLR.50.5172 MS2

STJLR.50.5172 MS3

STJLR.50.5172 MS4

STJLR.50.5172 MS0+Z100

STJLR.50.5172 MS1+Z100

STJLR.50.5172 MS2+Z100

STJLR.50.5172 MS3+Z100

STJLR.50.5172 MS4+Z100

Our company: Hengqiao(Shanghai) International Trading Limited

The company's main business is general GMW standard, Fiat EFE standard, Volvo VDA standard, Nissan NEN standard, Volkswagen VW50065, Ford WSS-M and other standard series of automotive steel.
Looking forward to your inquiry！

VDA 239-100 CR1

VDA 239-100 CR2

VDA 239-100 CR3

VDA 239-100 CR4

VDA 239-100 CR5

VDA 239-100 HR0

VDA 239-100 HR2

VDA 239-100 CR210LA

VDA 239-100 CR240LA

VDA 239-100 CR270LA

VDA 239-100 CR300LA

VDA 239-100 CR340LA

VDA 239-100 CR380LA

VDA 239-100 CR420LA

VDA 239-100 CR460LA

VDA 239-100 HR300LA

VDA 239-100 HR340LA

VDA 239-100 HR380LA

VDA 239-100 HR420LA

VDA 239-100 HR460LA

VDA 239-100 HR500LA

VDA 239-100 HR550LA

VDA 239-100 HR700LA

VDA 239-100 CR160IF

VDA 239-100 CR180IF

VDA 239-100 CR210IF

VDA 239-100 CR240IF

VDA 239-100 CR180BH

VDA 239-100 CR210BH

VDA 239-100 CR240BH

VDA 239-100 CR270BH

VDA 239-100 CR290Y490T-DP

VDA 239-100 CR330Y590T-DP

VDA 239-100 CR440Y780T-DP

VDA 239-100 CR590Y980T-DP

VDA 239-100 CR700Y980T-DP

VDA 239-100 HR330Y580T-DP

VDA 239-100 CR440YT780-DH

VDA 239-100 CR700YT980-DH

VDA 239-100 CR400YT690-TR

VDA 239-100 CR450YT780-TR

VDA 239-100 CR570YT780T-CP

VDA 239-100 CR780YT980T-CP

VDA 239-100 CR900YT1180T-CP

VDA 239-100 HR660Y760T-CP

VDA 239-100 CR860Y1100T-MS

VDA 239-100 CR1030Y1300T-MS

VDA 239-100 CR1220Y1500T-MS

VDA 239-100 CR1350Y1700T-MS

VDA 239-100 HR900Y1180T-MS

VDA 239-100 HR300Y450T-FB

VDA 239-100 HR440Y580T-FB

VDA 239-100 HR600Y780T-FB

Our company: Hengqiao(Shanghai) International Trading Limited

The company's main business is general GMW standard, Fiat EFE standard, Volvo VDA standard, Nissan NEN standard, Volkswagen VW50065, Ford WSS-M and other standard series of automotive steel.
Looking forward to your inquiry！

B53 3271 Ci

B53 3271 Ei

B53 3271 ESi

B53 3271 SESi

B53 3271 1Ci

B53 3271 3Ci

B53 3271 E180BHi

B53 3271 E220BHi

B53 3271 P220i

B53 3271 P260i

B53 3271 E275Di

B53 3271 E335Di

B53 3271 E390Di

B53 3271 HD300LAi

B53 3271 HD380LAi

B53 3271 HE445Di

B53 3271 HE490Di

B53 3271 DP450i

B53 3271 DP600i

B53 3271 DP780i

B53 3271 FB60i

B53 3271 PHS 1500i

B53 3312 E275D

B53 3312 E335D

B53 3312 E390D

Our company: Hengqiao(Shanghai) International Trading Limited

The company's main business is general GMW standard, Fiat EFE standard, Volvo VDA standard, Nissan NEN standard, Volkswagen VW50065, Ford WSS-M and other standard series of automotive steel.
Looking forward to your inquiry！

FEP03ZNT/F

FEP04ZNT/F

FEP05ZNT/F

FEP06ZNT/F

FEE180IFZNT/F

FEE210IF ZNT/F

FEE220BH ZNT/F

FEE270FZNT/F

FEE315F ZNT/F

FEE340F ZNT/F

FEE355F ZNT/F

FEE420F ZNT/F

FE600DP F ZNT/F

FE800DP F ZNT/F

FE700TR F ZNT/F

FE1000DP F ZNT/F

FE1200DP F ZNT/F23

Our company: Hengqiao(Shanghai) International Trading Limited

The company's main business is general GMW standard, Fiat EFE standard, Volvo VDA standard, Nissan NEN standard, Volkswagen VW50065, Ford WSS-M and other standard series of automotive steel.
Looking forward to your inquiry！