Metallic material
Innovation | Professionalism
Integrity | Efficiency
Metallic material
Innovation | Professionalism
Integrity | Efficiency
430 stainless steel is a type of ferritic stainless steel that contains chromium as its primary alloying element. It belongs to the 400 series of stainless steels, which are known for their excellent corrosion resistance and moderate strength.
In terms of composition, 430 stainless steel contains about 16-18% chromium and less than 0.12% carbon. It also contains small amounts of other elements such as nickel, manganese, and silicon.
430 stainless steel is widely used in various applications such as kitchen appliances, automotive trim, and architectural components. It is particularly popular in the food industry due to its corrosion resistance, ease of cleaning, and low cost.
However, it is important to note that 430 stainless steel is not as corrosion-resistant as some other types of stainless steel, such as 316 or 304. It also has lower toughness and ductility than austenitic stainless steels, which can make it more difficult to form and weld. Nevertheless, 430 stainless steel is a versatile and cost-effective material that is well-suited for many applications.
| Element% | C | Si | Mn | P | S | Cr | Ni |
| min | - | - | - | - | - | 16 | - |
| max | 0.12 | 1 | 1 | 0.04 | 0.03 | 18 | 0.75 |
Note: These values are typical
| Tensile strength | Yield strength | Elongation | |||
| 450 - 600 Mpa | ≥ 205 Mpa | ≥ 22% |
Note: These values are approximate
| Property | Value |
| Density | 7.7 g/cm³ |
| Melting point | 1425 - 1510 °C |
| Coefficient of thermal expansion | 10.4 × 10⁻⁶ /°C |
| Thermal conductivity | 25.6 W/m·K |
| Electrical resistivity | 60 Ω·nΩm |
| Magnetic | Ferromagnetic (has magnetism) |
Note: These values are approximate
Our company: Hengqiao(Shanghai) International Trading Limited
As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！
SUS410L is a low-carbon, non-hardening ferritic stainless steel that belongs to the 13% chromium family of stainless steels. It is commonly used for applications that require good corrosion resistance and moderate strength, such as automotive exhaust systems, heat exchangers, and kitchen equipment.
Compared to other types of stainless steel, SUS410L has relatively low carbon content, which makes it less prone to sensitization and intergranular corrosion. Additionally, its low carbon content makes it more formable and easier to weld than other ferritic stainless steels.
SUS410L is often used as a replacement for other types of stainless steel that contain higher levels of carbon, such as SUS410 or SUS430, in order to reduce the risk of intergranular corrosion. However, its lower carbon content also means that it has lower strength and hardness than other ferritic stainless steels.
| Element% | C | Si | Mn | P | S | Cr | Ni |
| min | - | - | - | - | - | 11 | - |
| max | 0.03 | 1 | 1 | 0.04 | 0.03 | 13.5 | 0.6 |
Note: These values are typical
| Tensile strength | Yield strength | Elongation | |||
| 440 Mpa | 275 Mpa | 20% |
Note: These values are approximate
Property | Value |
| Density | 7.75 g/cm³ |
| Coefficient of thermal expansion | 10.8 x 10^-6 / °C |
| Thermal conductivity | 24.9 W/m·K |
| Electrical conductivity | 0.6 x 10^-6 Ω·m |
| Magnetic permeability | 1.02 μT·m/A |
Note: These values are approximate
Our company: Hengqiao(Shanghai) International Trading Limited
As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！
405 stainless steel is a type of ferritic stainless steel that contains 11.5-14.5% chromium and is often used in applications where mild corrosion resistance and good weldability are required. It also contains small amounts of nickel and molybdenum, which provide additional corrosion resistance and strength.
One of the key advantages of 405 stainless steel is its ability to be easily welded, even without preheating or post-weld heat treatment. This makes it a popular choice for fabrication and manufacturing processes that require welding, such as exhaust systems, heat exchangers, and automotive components.
405 stainless steel is also known for its good resistance to oxidation and scaling at high temperatures, making it suitable for use in high-temperature applications such as furnace parts and heat treatment equipment.
However, it is important to note that 405 stainless steel may not be suitable for applications where high levels of corrosion resistance are required, as it has lower corrosion resistance than other types of stainless steel such as 304 and 316.
| Element% | C | Si | Mn | P | S | Cr | Al |
| min | - | - | - | - | - | 11.5 | 0.1 |
| max | 0.08 | 1 | 1 | 0.04 | 0.03 | 14.5 | 0.3 |
Note: These values are typical
| Tensile strength | Yield strength | Elongation | |||
| 483 Mpa | 207 Mpa | 25% |
Note: These values are typical values for annealed 405 stainless steel
| Property | Value |
| Density | 7.75 g/cm3 |
| Melting Point | 1400-1450°C |
| Specific Heat Capacity | 460 J/kg°C |
| Thermal Conductivity | 22.2 W/mK |
| Electrical Resistivity | 550 nΩ.m |
| Modulus of Elasticity | 200 GPa |
| Coefficient of Thermal Expansion | 11.4 x 10^-6/°C |
Note: These values are approximate
Our company: Hengqiao(Shanghai) International Trading Limited
As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！
347 stainless steel is a type of austenitic stainless steel alloy with a high resistance to intergranular corrosion. It contains a minimum of 17% chromium, 10% nickel, and 0.08% carbon, which makes it resistant to sensitization during welding and high-temperature applications.
The addition of niobium to 347 stainless steel enhances its resistance to intergranular corrosion, making it suitable for use in applications involving exposure to corrosive environments, such as chemical processing, pharmaceuticals, and food processing.
347 stainless steel also has good mechanical properties, including high strength and excellent toughness, and is often used in applications that require high performance under extreme conditions. It is commonly used in the manufacturing of aircraft exhaust components, furnace parts, and jet engine components.
| Element% | C | Si | Mn | P | S | Cr | Ni | Nb |
| min | - | - | - | - | - | 17 | 9 | 0.8 |
| max | 0.08 | 1 | 2 | 0.045 | 0.03 | 19 | 12 | 1.1 |
Note: These values are typical
| Tensile strength | Yield strength | Elongation | |||
| 515 Mpa | 205 Mpa | 40% |
Note: These values are approximate
| Property | Value |
| Density | 7.93 g/cm3 |
| Melting Point | 1398 - 1446 °C (2550 - 2635 °F) |
| Thermal Conductivity | 16.3 W/(m*K) |
| Specific Heat | 500 J/(kg*K) |
| Electrical Resistivity | 7.4e-7 ohm-m |
| Modulus of Elasticity | 200 GPa (29.0 x 106 psi) |
| Magnetic Properties | Slightly magnetic |
Note: These values are approximate
Our company: Hengqiao(Shanghai) International Trading Limited
As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！
321 stainless steel is a type of austenitic stainless steel that contains titanium as a stabilizing element. It is similar to 304 stainless steel, but with improved corrosion resistance, particularly in high-temperature environments. The addition of titanium also prevents the formation of chromium carbide during welding, which can cause intergranular corrosion and reduce the material's durability.
321 stainless steel is commonly used in applications that require high-temperature resistance, such as aircraft exhaust systems, jet engine parts, and chemical processing equipment. It is also used in the manufacturing of equipment for the food and beverage industry, as it is resistant to corrosion from organic acids and fats.
| Element | C | Si | Mn | P | S | Cr | Ni | Ti |
| min | - | - | - | - | - | 17 | 9 | 0.40% |
| max | 0.08 | 1 | 2 | 0.045 | 0.03 | 19 | 12 | 0.70% |
Note: These values are typical
| Tensile strength | Yield strength | Elongation | |||
| 515 Mpa | 205 Mpa | 40% |
Note: These values are approximate
| Property | Value |
| Density | 8.0 g/cm³ |
| Melting Point | 1398 - 1454 °C |
| Thermal Conductivity | 14.6 W/mK at 100 °C |
| Coefficient of Thermal Expansion | 16.6 µm/m°C (0-100 °C) |
| Electrical Resistivity | 72.0 µohm/cm at 20 °C |
| Specific Heat Capacity | 0.50 J/g-°C at 20 °C |
| Magnetic Permeability | < 1.02 (nonmagnetic) |
Note: These values are approximate
Our company: Hengqiao(Shanghai) International Trading Limited
As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！
317L is an austenitic stainless steel which provides higher levels of chromium, nickel and molybdenum than other stainless steels, thus enhancing its corrosion resistance. The "L" in 317L signifies a lower carbon content compared to normal 317 steel, reducing the chances of sensitization and maintaining corrosion-resistant properties. This type of steel is commonly used in industries involving chemical and petrochemical processing, pulp & paper manufacturing, food production and pharmaceuticals where durability at high temperatures is essential. Due to its superior resistance to corrosive substances and elevated temperatures it can be found in cookers and sterilizers.
Element | C | Si | Mn | P | S | Cr | Ni | Mo |
| min | - | - | - | - | - | 18 | 11 | 3 |
| max | 0.03 | 1 | 2 | 0.045 | 0.03 | 20 | 15 | 4 |
Note: These values are typical
| Tensile strength | Yield strength | Elongation | |||
| 515-620 Mpa | 205-310 Mpa | 35-55% |
Note: These values are approximate
| Property | Value |
| Density | 7.99 g/cm³ |
| Melting Point | 1383-1398°C (2519-2550°F) |
| Specific Heat Capacity | 502 J/kg·K |
| Thermal Conductivity | 14.6 W/m·K |
| Electrical Resistivity | 75.0 µΩ·m |
| Modulus of Elasticity | 193 GPa |
| Poisson's Ratio | 0.27-0.30 |
| Coefficient of Thermal Expansion | 16.5 µm/m·K (at 0-100°C) |
| Magnetic Properties | Nonmagnetic |
Note: These values are approximate
Our company: Hengqiao(Shanghai) International Trading Limited
As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！
317 stainless steel is an austenitic stainless steel with high levels of chromium, nickel, and molybdenum. This steel type is highly resistant to corrosion and is especially suitable for harsh environments such as chemical processing, marine, and high-temperature applications.
In addition to its excellent corrosion resistance, 317 stainless steel has good mechanical properties, such as high tensile strength, good ductility, and excellent toughness. It is highly resistant to stress corrosion cracking and is often used in applications that require resistance to chlorides and sulfides.
Common applications for 317 stainless steel include chemical processing equipment, pulp and paper industry, food and beverage processing, pharmaceutical industry, and petrochemical industry. It is also used in high-temperature applications, such as heat exchangers, furnace parts, and boilers.
Element | C | Si | Mn | P | S | Cr | Ni | Mo |
| min | - | - | - | - | - | 18 | 11 | 3 |
| max | 0.08 | 1 | 2 | 0.045 | 0.03 | 20 | 15 | 4 |
Note: These values are typical
| Tensile strength | Yield strength | Elongation | |||
| 515 Mpa | 205 Mpa | 35% |
Note: These values are approximate
| Property | Value |
| Density | 7.98 g/cm³ (0.289 lb/in³) |
| Melting point | 1370-1400°C (2498-2552°F) |
| Specific heat capacity | 502 J/kg·K (0.12 BTU/lb·°F) |
| Thermal conductivity | 14.6 W/m·K (10.1 BTU/h·ft·°F) |
| Electrical resistivity | 75.0 µΩ·m (23.0 µΩ·in) |
Note: These values are approximate
Our company: Hengqiao(Shanghai) International Trading Limited
As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！
316N stainless steel is an austenitic stainless steel that is primarily composed of iron, chromium, nickel, and a small amount of nitrogen. It is a high-performance material that is known for its excellent strength, durability, and resistance to corrosion, particularly in chloride environments.
The "N" in 316N stands for nitrogen, which is added to the alloy in order to improve its strength and corrosion resistance. The addition of nitrogen also enhances the austenitic structure of the steel, which improves its toughness and ductility. This makes it particularly useful in applications where the material will be subjected to high stress or high temperatures.
Element | C | Si | Mn | P | S | Cr | Ni | Mo |
| min | - | - | - | - | - | 16 | 10 | 2 |
| max | 0.03 | 1 | 2 | 0.045 | 0.03 | 18 | 14 | 3 |
Note: These values are typical
| Tensile strength | Yield strength | Elongation | |||
| 515 Mpa | 205 Mpa | 40% |
Note: These values are approximate
| Property | Value |
| Density | 7.98 g/cm³ |
| Melting point | 1370-1400°C |
| Thermal conductivity | 16.3 W/m·K |
| Electrical resistivity | 740 nΩ·m |
| Young's modulus | 193 GPa |
| Specific heat capacity | 502 J/kg·K |
| Coefficient of thermal expansion | 16.5 × 10<sup>-6</sup>/K |
Note: These values are approximate
Some of the key characteristics of 316N stainless steel include its high strength, excellent corrosion resistance, and ability to withstand high temperatures. It is also resistant to oxidation and scaling at elevated temperatures, making it well-suited for use in high-temperature environments.
316N stainless steel is commonly used in a variety of industrial and commercial applications, including chemical processing, pharmaceuticals, marine equipment, and food processing. It is also frequently used in medical devices, as it is biocompatible and resistant to corrosion from bodily fluids.
Our company: Hengqiao(Shanghai) International Trading Limited
As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！
316L stainless steel is a type of austenitic stainless steel with a low carbon content. It is a highly corrosion-resistant material that contains chromium, nickel, and molybdenum.
The "L" in 316L stands for "low carbon," indicating that the steel has a carbon content of less than 0.03%, which helps to prevent corrosion. The chromium in 316L stainless steel gives it its corrosion-resistant properties by forming a passive oxide layer on the surface of the steel, which helps to prevent corrosion from occurring. The nickel in 316L stainless steel enhances its corrosion resistance and also gives it a lustrous appearance. The molybdenum in 316L stainless steel provides additional corrosion resistance and also increases its strength and toughness.
Element | C | Si | Mn | P | S | Cr | Ni | Mo |
| min | - | - | - | - | - | 16 | 10 | 2 |
| max | 0.03 | 1 | 2 | 0.045 | 0.03 | 18 | 14 | 3 |
Note: These values are typical
| Tensile strength | Yield strength | Elongation | |||
| 620 Mpa | 310 Mpa | 55% |
Note: These values are approximate
| Property | Value |
| Density | 8.0 g/cm^3 (0.289 lb/in^3) |
| Melting point | 1370-1400 °C (2500-2550 °F) |
| Thermal conductivity | 16.2 W/(m*K) at 100 °C (212 °F) |
| Electrical resistivity | 7.98 μΩ*cm at 20 °C (68 °F) |
| Thermal expansion coefficient | 16.5 μm/(m*K) at 20-100 °C (68-212 °F) |
| Specific heat capacity | 500 J/(kg*K) at 20 °C (68 °F) |
| Magnetic properties | non-magnetic |
Note: These values are approximate
316L stainless steel is commonly used in a wide range of applications, including medical devices, jewelry, kitchen equipment, marine hardware, and chemical processing equipment. It is also used in the construction of buildings, bridges, and other structures that require a high degree of corrosion resistance.
In addition to its corrosion-resistant properties, 316L stainless steel is also known for its high heat resistance and excellent formability, making it a versatile material for a variety of applications.
Our company: Hengqiao(Shanghai) International Trading Limited
As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！
316 stainless steel is a type of austenitic stainless steel that contains 16-18% chromium, 10-14% nickel, 2-3% molybdenum, and other elements such as manganese, silicon, and carbon. It is a highly corrosion-resistant alloy that is widely used in various applications where resistance to corrosion and high temperature is required.
The addition of molybdenum to 316 stainless steel makes it more resistant to pitting and crevice corrosion in chloride environments than other stainless steel grades. It also enhances the alloy's strength and toughness, making it suitable for applications such as chemical processing, marine environments, and medical devices.
Element | C | Si | Mn | P | S | Cr | Ni | Mo |
| min | - | - | - | - | - | 16 | 10 | 2 |
| max | 0.08 | 1 | 2 | 0.045 | 0.03 | 18 | 14 | 3 |
Note: These values are typical
| Tensile strength | Yield strength | Elongation | |||
| 515 Mpa | 205 Mpa | 40% |
Note: These values are approximate
| Property | Value |
| Density | 8.00 g/cm³ |
| Melting Point | 1370-1400 °C |
| Specific Heat | 500 J/kg·K |
| Thermal Conductivity | 16.3 W/m·K at 100 °C |
| Electrical Conductivity | 1.25 × 10^6 S/m |
| Modulus of Elasticity | 193 GPa |
| Poisson's Ratio | 0.3 |
| Thermal Expansion | 16.5 × 10^-6 /K at 20-100°C |
| Magnetic Properties | Nonmagnetic (paramagnetic) |
Note: These values are approximate
316 stainless steel is also known as marine grade stainless steel due to its excellent corrosion resistance in saltwater and other corrosive environments. It is often used in the construction of boats, yachts, and other marine equipment.
In addition to its corrosion resistance, 316 stainless steel has good weldability and formability, making it easy to work with. It is also resistant to high temperatures and is often used in applications where exposure to extreme heat is a concern.
Our company: Hengqiao(Shanghai) International Trading Limited
As a premium supplier of stainless steel, we offer a wide range of grades, sizes and finishes to suit your needs.
Size: according to customer requirements
Standards: GB, ASTM, EN, JIS, etc.
Coil/Tube/Pipe/Sheet/Strip/wire/Bar/Channel
Austenitic type
Ferritic type
Martensitic type
Looking forward to your inquiry！